1位
【エフェクター】
多様なLFO波形で強力なモジュレーションが可能なコーラス/フランジャー・エフェクト。フランジャーは0.6〜10mS、コーラスは5〜50mSのディレイタイム使用。タップテンポでタイム設定。また、MIDIによるコントロールが可能。MIDIのみで設定可能なローファイモードでディレイを8倍まで利用可能。デバイスの供給の関係で限定生産でお届けします。 Front Panel TIME: Adjust delay time 0.6mS to 10mS in Flange mode and 5mS to 50mS in Chorus mode. RANGE: Select between Flanger and Chorus mode FEEDBACK: Continuous control from no feedback to infinite feedback. Bi-Polar control allows the feedback to highlight even or odd harmonics. DRIVE: Allows between -7dB and +28dB of gain or attenuation of the input signal for optimum signal path, level matching and distortion sounds. OUTPUT: Allows gain and attenuation of output signal for compatibility with a widerange of input devices. MIX: Cross fader control to vary the amount of wet or dry signal heard on output. LFO: Six position rotary switch to select the LFO wave shape for delay time modulation. Select between Sine, Triangle, Square, Ramp, Saw and Random stepped modulation. LFO RATE: Adjust the LFO rate from the sub audio to audio rates. Control from 0.05 Hz to 50 Hz from the front panel (more from the CV). LFO AMOUNT: Controls the amount of LFO modulation of the delay time. LEDs and switches RATE: A Bi-Color LED to display the rate and shape of the LFO wave as well as the source of control. MIDI: A Bi-Color LED to display the presence of MIDI control. LEVEL: A Bi-Color LED to display the level of the input signal post drive control for optimum processing level. BYPASS: A Bi-Color LED to indicate if the effect is engaged or not. TAP TEMPO: A rugged smooth-acting stomp switch for setting LFO rate. BYPASS SWITCH: A rugged smooth-acting stomp switch bypassing the unit with a buffered input. Back Panel Features AUDIO IN: 1/4” phone jack – accepts any instrument-level to line-level audio signals. LEFT / MONO AUDIO OUT: 1/4” phone jack 1/4” phone jack with adjustable output level for instrument or line level output. RIGHT / Stereo OUT: A Second output dip switch configurable for either Stereo out (two types), Delay only out, or dual mono out. FEEDBACK, TIME, LFO RATE, MIX, LFO AMOUNT: all of which are stereo 1/4” jacks that accept Moogerfooger EP-2 (or equivalent) expression pedals, or 0-5V control voltages from either two-circuit or three-circuit 1/4” jacks. FEEDBACK INSERT: A 1/4” TRS Insert jack for inserting effects in the feedback loop of the delay chain. Line level output. MIDI IN: A 5 Pin DIN input for controlling the MF-108 via MIDI Control.+9V POWER INPUT JACK – accepts standard 9 volt center positive barrel power adaptor (power adaptor included). 300mA minimum required. 一般仕様 外形： 23 x 15 x 6.5 cm 重量： 1.8Kg 電源：AC100V入力専用ACアダプター使用（出力DC9V）■ トップ ⇒ 現在地moogerfoogerMF-108M [Cluster Flux]エフェクター
商品詳細
